|
|
| |
|
| |
Back
|
|
| |
|
| |
| The
clamp and cutting device (exclusivity Robopac) allows
the pallet wrapper to automatically carry out all phases of film cutting
and fastening while palletized loads are wrapped with
stretch film. The operator places the load on the
turntable, starts-off cycle by remote control and,
after having accomplished the wrapping cycle in an
automatic manner, removes the pallet. |
|
|
|
|
rotoplat_a.gif
RotoPlat A Video
|
| Rotation
speed adjustable from panel board with acceleration
and deceleration controlled by frequency. |
| Phase
stopping point |
(+/-
20 mm) |
| Load height sensing
photocell |
|
Up/down spool carriage speed with 20 % average
overlapping synchronized with table rotation speed |
| Control board by
microprocessor with digital push buttons for
adjustment and selection of load wrapping parameters |
|
Diagnostic synoptic panel |
| Standard supply voltage |
400 V 3 PH + N - 50/60 HZ
230 V 3 PH - 50/60 HZ
230 V 1 PH - 50/60 HZ |
|
OPTION
|
| Up/
down roll carriage speed adjustment by frequency
changer |
| Plate diameter 1800 mm. for loads
1200x1200 mm |
(excluded version TP) |
| Mast for loads |
2800 mm. |
| Ramp for 1650 mm. plate diameter |
|
| Ramp for 1800 mm.
plate diameter |
|
| Pneumatic
top platen (stroke 800 mm.) for loads 2400 mm. high |
|
Pneumatic top-platen (stroke 800 mm.) loads 2800 mm.
high. |
|
|
|
| |
|
| |
|
|
| |
|
PackSmart, Inc. ● 775 W. Belden Avenue, Suite F, Addison, IL 60101
● Tel: 630.262.6600 ● Fax: 630.761.3309 |
|
PackSmart, Inc. ● 11727 W. Dearbourn Avenue, Suite B, Wauwatosa, WI
53226 ● Tel: 414.257.9600 ● Fax: 414.257.9601 |
| Copyright © 2010 PackSmart, Inc. packsmart.com®
PackSmart® |
| Central Shipping Supplies,
Inc., Central
Shipping |
|
|
Home
