Brochure

BEL 450

Poly Bag Inserter & Pack Station with Semi-Automatic Top & Bottom Case Taping

Designed for use on bulk filling lines, the BEL 450 provides a cost effective alternative to the difficult process of manually inserting poly bag liners into corrugated cases.

Cases are placed on the vacuum plenum after which a poly bag liner is placed into the box. The bag is quickly drawn fully into the case leaving no voids in the box corners, and the case is then ready to be filled.

Filling of cases can be done manually or automated further with the inclusion of an optional programmable weigh scale that can also verify count. Alternatively the BEL 450 can be fitted with an optional load cell for interfacing with existing automatic scale filling equipment such as auger or hopper fillers, and belt feeders. After filling, the operator closes the poly liner, folds the top case flaps closed and moves the case forward into the conveyor where tape is automatically applied to seal the top and bottom flaps.

Brochure

BEL 451

Poly Bag Inserter & Pack Station with Bottom only Case Taping

The BEL 451 is designed for manual bulk filling lines where a poly bag liner is required to be inserted into the case before filling. The operator positions the case on the vacuum plenum with the minor flaps folded, places the liner in the case and cuffs it over the open top flaps. The vacuum then draws the bag fully into the case leaving no voids in the box corners. The case is then moved forward into the conveyor where tape is automatically applied to seal the bottom flaps closed. The lined case is then ready to be filled.

The BEL 451 is a cost effective, clean approach to providing bulk filling lines with a ready, on demand supply of lined cases while improving operating efficiencies and ergonomic safety.